2013 Limited Late Model Rules

• Any Driver must have a Valid Driver’s License or Learners Permit
• Max 363 Cubic Inch
• Any Steel Block
• Any Steel Crank ( No Titanium or Aluminum )
• Any Steel Rod ( No Titanium or Aluminum )
• Any Flat Top Piston
• Any Cam  * Add #50 for Roller
• Lifters Chevy .842
• Dry Sump allowed * Add #50
• GM 23 Degree Casted Head: Angle Milling allowed max 2 Degrees : Head Degree must be between 23 Degree and 20 Degree ( No Tolerance). Steel only.
• No Raised Runner Heads
• Valves Intake Max 2.055 Exhaust Max 1.600 : 11/32 Stem
• Any Intake
• Any one (1) Four Barrel permitted
• Any Ignition: No Traction Control: All Boxes Subject to Impound and Inspection at any time.
• Setback 6 inch max
• Tires: Across Rear Hoosier 1600 or American Racer 56 Only: Front Tires Open: Rear Tires must punch 58: 411 Motor speedway reserves the right to impound any tire suspected of being treated chemically at any time.
• Lucas/SRRS Body Rules Apply
• Base Weight #2350  
• Roller Add 50 #
• Dry Sump Add 50 #

604 Crate

• Must be Sealed, GM, Nesmith or Fastrak: Any Other Seals call before you haul.
• Weight # 2200
• Open Tires
• 12 Inch Spoiler and Sides or 8 Inch Spoiler with 12 Inch x 32 Inch Left Side Board: If you choose the Side Board Your Right side Wing and middle wing must be 8 Inches to match the spoiler .
• Engine will be teched Inside the Seals by GM specs.

602 Crate

• Must be Sealed: GM, Nesmith or Fastrak: Any Other Seals call before you haul.
• No Weight
• Open Tires
• 12 Inch Spoiler with 12 Inch x 32 Inch Side Board
• Motor will be teched Inside the Seals by GM specs.
•